Member_2_7349958
asked on
WLC 5508 controller configuration
I see below erros in best practices:
Security: It is recommended to monitor all channels for rogue detection. Band:5 GHz
Security: It is recommended to monitor all channels for rogue detection. Band:2.4 GHz
Please advise what settings to make to resolve this issue. It is Cisco 5508 WLAN controller.
Security: It is recommended to monitor all channels for rogue detection. Band:5 GHz
Security: It is recommended to monitor all channels for rogue detection. Band:2.4 GHz
Please advise what settings to make to resolve this issue. It is Cisco 5508 WLAN controller.
You need to enable rouge detection on both the frequency. its not an error
ASKER
What is rogue detection? Is it recommended to enable them on both the frequencies?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/70987-rogue-detect.html