Claude Constantinescu
asked on
Error after Restoring VM machine
Hi, I created a new VM machine following the steps from here, HOW TO: Backup (Export) and Restore (Import) virtual machines to VMware vSphere Hypervisor 5.1 for FREE, but when I try to open the VM client, I get the error attached. Thanks
VM-Error.JPG
VM-Error.JPG
ASKER
It's a Tape Drive
SCSI-Device.JPG
SCSI-Device.JPG
Firstly tape drives are not supported by ESXi, being connected to a host. (also USB devices such as external disks are not supported either, so it's very lucky you have got it to work!)
If you want to Export it, you will need to remove the USB device and Tape Drive, and then export it.
Note: As per the vSphere 5.x Release Notes, VMware does not support Tape Drives connected directly to ESXi 5.x.
see here
Configuring vendor-supported tape drives and media changers on VMware ESX/ESXi 4.x/5.x (1016407)
If you want to Export it, you will need to remove the USB device and Tape Drive, and then export it.
Note: As per the vSphere 5.x Release Notes, VMware does not support Tape Drives connected directly to ESXi 5.x.
see here
Configuring vendor-supported tape drives and media changers on VMware ESX/ESXi 4.x/5.x (1016407)
ASKER
I removed all the USB drives, I forgot about this tape drive. I will just have to export it again (takes 22 hours) and then import it
Thanks
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I removed the SCSI device and now the server powers on fine, thanks!
What is SCSI device 0,2, a virtual machine or CDROM....
It may be worth trying the Export again.
Also check to see if you are missing a file?
How long did it take to Import the VM ?