leblanc
asked on
route-map permit with a number
I am adding a new route-map MY-FILTER to my Cisco switch config. But I see that I already have another route-map MY-ROUTE-MAP. Both route-maps have the PERMIT 10 but they are calling different ACL. Will my existing MY-ROUTE-MAP be affected by the new MY-FILTER? Thx
int vlan 10
ip policy route-map MY-ROUTE-MAP
!
access-list 1 deny 10.20.20.0 0.0.0.255
access-list 1 permit any
!
access-list 10 permit 10.10.10.0 0.0.0.127
access-list 10 permit 10.10.10.0 0.0.0.127
route-map MY-ROUTE-MAP permit 10
match ip address 10
set ip default next-hop 192.168.1.1
!
route-map MY-FILTER permit 10
match ip address 1
ROUTER EIGRP 1
redistribute static route-map MY-FILTER metric 100 1 255 1 1500
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.