<div>
<div class="content wysiwyg-content">
You have a host without jumbo frame ability in its nic that is connected to a switch where jumbo frames are enabled globally. Is it able to communicate properly? Thank you.
</div>
</div>


You have a host without jumbo frame ability in its nic that is connected to a switch where jumbo frames are enabled globally. Is it able to communicate properly? Thank you.

Non-jumbo host to jumbo enabled switch: Will it work?

Switch

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Network design and methodology, also known as network architecture, is the design of a communication network. It is a framework for the specification of a network's physical components and their functional organization and configuration, its operational principles and procedures, as well as data formats used in its operation. In telecommunication, the specification of a network architecture may also include a detailed description of products and services delivered via a communications network, as well as detailed rate and billing structures under which services are compensated.