Link to home
Start Free TrialLog in
Avatar of Pumpernickel
PumpernickelFlag for United States of America

asked on

IR 1023 Scanning

I'm trying to setup scan to folder on an IR 1023.  These are the settings I have but its not working.  I tried the username as domain\!scans, i tried \ in file patch... I'm not sure what else to do and there is no logs.  Im not even seeing it auth at the server and get denied
Avatar of masnrock
masnrock
Flag of United States of America image

On the copier, go to Additional Functions, System Settings, Network Settings, SMB Settings, Use SMB Client. If that's not on, it will never try to authenticate.

Another thing to try is that you may also have to change the LAN Manager Authentication Level policy. Make sure that it is not "Send NTLMv2 response only\refuse LM & NTLM"
These are the settings I have
What settings? Please post a screen shot.

From a PC (not the one you're scanning to), as an ordinary user, not admin, try creating a file in the scan folder. If that works, replicate your settings on the scanner.
Avatar of Pumpernickel

ASKER

I thought I posted it.  Attached.
Screen-Shot-2017-03-20-at-12.29.54-P.png
ASKER CERTIFIED SOLUTION
Avatar of masnrock
masnrock
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial