Albert Widjaja
asked on
Hardware status and alerting for ESXi servers ?
People,
I'm running HP Proliant rack servers ranging from G5-G9 for all of my ESXi server 5.1 - 6.0, some of the servers reporting the broken local disk and also PowerSupply.
How do I get some hardware issue / alerting from the ESXi server ?
Thanks,
I'm running HP Proliant rack servers ranging from G5-G9 for all of my ESXi server 5.1 - 6.0, some of the servers reporting the broken local disk and also PowerSupply.
How do I get some hardware issue / alerting from the ESXi server ?
Thanks,
ASKER
hi Andrew, Where can I setup or enable the alert in Vcenter ?
Some of the ESXi server is installed by using the standard image not from the HP image. I assume I can just upgrade it to the latest edition by performing inline upgrade with no data / configuration lost.
Some of the ESXi server is installed by using the standard image not from the HP image. I assume I can just upgrade it to the latest edition by performing inline upgrade with no data / configuration lost.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
OK, so my plan will be:
1. Apply firmware update on the server using HP SPP
2. install the latest HPE ESXi image manually through iLO on top of the current running ESXi server.
3. Configure the alarm definition Health status changed alarm
is that correct ?
1. Apply firmware update on the server using HP SPP
2. install the latest HPE ESXi image manually through iLO on top of the current running ESXi server.
3. Configure the alarm definition Health status changed alarm
is that correct ?
Yes. That's correct.
ASKER
Thanks Andrew
So do you get Alerts in ESXi/vCenter Server ?