Solved

X2 to x0 on sonicwall tz200

Posted on 2017-04-18
1
15 Views
Last Modified: 2017-04-19
Hello.  I have a Sonic Wall TZ200, "Sonic Wall A" with an x0 (LAN) subnet of 192.168.3.1.  I have several computers connected to this subnet.  I have x2 on "Sonic Wall A" set up with and IP of 192.168.104.200 and I route that to another Sonic Wall TZ200, "Sonic Wall B" to the x2 port with an IP address of 192.168.104.100.  This is working fine and from any computer on "Sonic Wall A" 192.168.3.1 subnet I can manage "Sonic Wall B" using the 192.168.104.100 ip address.    

What I am now having trouble with is completing the connection from "Sonic Wall B" x2 (192.168.104.100) to "Sonic Wall B" x0 (192.168.103.1) with the ultimate intention of being to access a Network Video Recorder (NVR) with an IP of 192.168.103.25.

Sonic Wall A:
  address objects:
    Camera LAN             192.168.103.000/255.255.255.000  Network   LAN
    Camera NVR             192.168.103.025/255.255.255.255  Host         LAN
    x2 Camera TZ200    192.168.104.100/255.255.255.255  Host          LAN

 Services Groups:
    NVR Ports: NVR Mobile Port Access, NVR Port Access, NVR Video Port Access

 Services:
    NVR Mobile Port Access    TCP    8000     8003
    NVR Port Access                 TCP    9000     9003
    NVR Video Port Access      TCP    10081  10081

 Routing:
    Source: Any  Destination: Camera LAN  Service: Any  TOS: Any  Gateway: x2 Camera TZ200  Interface: x2  Metric: 20  Priority: 6

Sonic Wall B:
 Address Objects:
    RDC LAN             192.168.003.000/255.255.255.000   Network   LAN
    x2 RDC TZ200    192.168.104.200/255.255.255.255   Host          LAN

Services Groups:
    NVR Port Access: Camera Management Port, Camera Mobile Port Access, Camera Video Port Access
 
Services:
    Camera Video Port Access                   TCP    8000     8003
    Camera Mobile Port Access                 TCP    9000     9003
    Camera Management Port Access      TCP   10081  10081

Routing:
    Source             Destination            Service          TOS/Mask          Gateway          Interface          Metric         Priority
               Any                  RDC LAN                 Any                  Any               2 RDC TZ200          x2                      7                   2
               RDC LAN            Any                       Any                  Any               2 RDC TZ200          x2                      10                 5
               Any                     Any                       Any                  Any               2 RDC TZ200          x2                      1                   6
0
Comment
Question by:Perrin25
1 Comment
 
LVL 8

Accepted Solution

by:
J Spoor earned 500 total points
is this the same thread as https://www.experts-exchange.com/questions/29015554/sharing-subnet-on-sonicwall.html#a42097724

x2 Camera TZ200    192.168.104.100/255.255.255.255  Host          LAN
should be zone Camera, not LAN

this is an incorrect route
RDC LAN            Any                       Any                  Any               2 RDC TZ200          x2                      10                 5
please remove this
0

Featured Post

Secure Your Active Directory - April 20, 2017

Active Directory plays a critical role in your company’s IT infrastructure and keeping it secure in today’s hacker-infested world is a must.
Microsoft published 300+ pages of guidance, but who has the time, money, and resources to implement? Register now to find an easier way.

Join & Write a Comment

Suggested Solutions

Let’s list some of the technologies that enable smooth teleworking. 
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question