Chewe Chileshe
asked on
SonicPoint N2 will not provision on SonicWall NSA220
We have a SonicWall NSA 220 configured and working with 2 x SonicPoint NE'2 configured and working. We are trying to add a SonicPoint N2 and have tried a directly configured port in the WLAN zone and also with the port configured as PortShield to the already configured working port. In both cases, the SonicWall does not appear to be picking up and provisioning the new SonicPoint device.
Is there a manual scan option for it to search for unprovisioned devices? Is there something else we should be doing?
Is there a manual scan option for it to search for unprovisioned devices? Is there something else we should be doing?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Exactly what version do you have? Is at 5.9.1 or higher?
ASKER
You pointed me on the right track, I checked the firmware requirements for the N2 and for the Gen5 device I have, ver 5.9.1.0 and above so I upgraded and the new radio appeared after the reboot.
Thanks
Thanks
ASKER