Member_2_231077
asked on
PERC S300 degraded virtual disks but physical disks good
Two logical disks on a S300, one SAS 300GB one SATA 1TB both degraded non-critical. Initially one of the SATA disks was showing as being in the array but also a global spare. Unassigned that as global spare via OMSA as it clearly wasn't a global spare but logical disks still both showing degraded. The logical disk size is 0.01GB !
copy/paste from DSET report:
Status Name State Progress Layout Size Device Name Bus Protocol Media Read Policy Write Policy Cache Policy Stripe Element Size Disk Cache Policy
Status: Noncritical Virtual Disk 1 Degraded Not Applicable RAID-1 0.01 GB (11545440 bytes) Windows Disk 0 SAS HDD No Read Ahead Write Through Not Applicable Not Applicable Not Applicable
Status: Noncritical Virtual Disk 2 Degraded Not Applicable RAID-1 0.01 GB (11545440 bytes) Windows Disk 1 SATA HDD No Read Ahead Write Through Not Applicable Not Applicable Not Applicable
Any idea what to do to resolve without risking the data?
copy/paste from DSET report:
Status Name State Progress Layout Size Device Name Bus Protocol Media Read Policy Write Policy Cache Policy Stripe Element Size Disk Cache Policy
Status: Noncritical Virtual Disk 1 Degraded Not Applicable RAID-1 0.01 GB (11545440 bytes) Windows Disk 0 SAS HDD No Read Ahead Write Through Not Applicable Not Applicable Not Applicable
Status: Noncritical Virtual Disk 2 Degraded Not Applicable RAID-1 0.01 GB (11545440 bytes) Windows Disk 1 SATA HDD No Read Ahead Write Through Not Applicable Not Applicable Not Applicable
Any idea what to do to resolve without risking the data?
Did you rebuild within the array?
Did issue get resolved, if so did rebuild fix.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Unresolved but worth noting for me-too situations