<div>
Unfortunately my switch doesn't recognize this command. the most similiar that I've got was ip forward-broadcast that doesn't work at all. <br />
For this very first moment, I'm just doing a test with this switch because, as the same on the example, I work at a school and there is a VLAN for each Lab (around 12 and there is one of this switch on each lab) and I need to enable this functionality to perform some maintenence.
</div>


<div>
<div class="content wysiwyg-content">
Hi,<br />
<br />
I'm kind of new on switches configuration and I'm trying hard to enable wake on lan between two different VLANs on HP A5120 (JG9754A).<br />
<br />
I've did a lot of search and read some docs as well but nothing worked for me. That includes set ip forward-broadcast on the source VLAN and create an ACL to especify the source, destination and port type of the WOL.<br />
<br />
WOL works fine when sent within the same VLAN.<br />
<br />
Any help will be very usefull.<br />
<br />
Best regards,<br />
<br />
&nbsp;<br />
<br />
Lucas Andrade
</div>
</div>


Hi,

I'm kind of new on switches configuration and I'm trying hard to enable wake on lan between two different VLANs on HP A5120 (JG9754A).

I've did a lot of search and read some docs as well but nothing worked for me. That includes set ip forward-broadcast on the source VLAN and create an ACL to especify the source, destination and port type of the WOL.

WOL works fine when sent within the same VLAN.

Any help will be very usefull.

Best regards,

 

Lucas Andrade

Wake-on-Lan between Vlans on HP A5124-24G EI

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.