parturi
asked on
Door Opener system and Raspberry Pi
I have an analog door opener system in my building, this is the phone which opens the door: http://pasteboard.co/4JgctXi4x.jpg
I have a raspberri pi 3 model b, and a Pcf8591 ADC/DAC converter: http://articulo.mercadolibre.com.ar/MLA-641278286-modulo-pcf8591-conversor-4-ad-da-i2c-arduino-raspberry-_JM
What I want to do, is to connect the wires that goes to the analog door opener phone system into Raspberri PI, so I can hear/speak from a sip softphone installed in the raspberry pi.
Is this possible? I measured the voltage in the mic phone/speaker, it's shown in the picture. Not sure how to proceed with this.
Anyone? Thank you!!
I have a raspberri pi 3 model b, and a Pcf8591 ADC/DAC converter: http://articulo.mercadolibre.com.ar/MLA-641278286-modulo-pcf8591-conversor-4-ad-da-i2c-arduino-raspberry-_JM
What I want to do, is to connect the wires that goes to the analog door opener phone system into Raspberri PI, so I can hear/speak from a sip softphone installed in the raspberry pi.
Is this possible? I measured the voltage in the mic phone/speaker, it's shown in the picture. Not sure how to proceed with this.
Anyone? Thank you!!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Any more news?
Shall we close the question?
The provided info are good to start solving the problem.
ASKER
I'll draw a diagram of what you request and come back with it when finished.
Thanks for taking the time to answer!