Enhance Technology
asked on
Unable to enable HWIC 2FE
Hello,
We have install Cisco HWIC 2FE card over Cisco 1841 router but not able to enable.
System image file is "flash:c1841-advsecurityk9 -mz.124-15 .T6.bin"
Cisco 1841 (revision 7.0) with 117760K/13312K bytes of memory.
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
please suggest
We have install Cisco HWIC 2FE card over Cisco 1841 router but not able to enable.
System image file is "flash:c1841-advsecurityk9
Cisco 1841 (revision 7.0) with 117760K/13312K bytes of memory.
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
please suggest
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER