Link to home
Start Free TrialLog in
Avatar of steve kissner
steve kissnerFlag for United States of America

asked on

deny device from 2 of 3 vlans

we have 3 vlans on one network. dhcp and dns are on a 2008 r2 server. the vlans are setup on watchguard firewall. if i put the device in the deny filter in dhcp, it wont get on any of the vlans. i would like to let them connect to one of the vlans. any way to do this?
Avatar of CES
CES

Statically assign the device in the desired VLAN and set the switch port to native mode in the same?
Avatar of steve kissner

ASKER

i'm sorry, i forgot to mention that it is wireless
OK so let's get more detail then.  You have VLANs A, B and C.  You want the wireless device on let's say VLAN C.  Does the wireless access point have per-SSID VLAN tagging?
looking at the controller, doesnt seem like it does
its an hp msm720 controller
This question needs an answer!
Become an EE member today
7 DAY FREE TRIAL
Members can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.