Anonymous KH
asked on
ASA 5516-X
Dear Experts,
Tomorrow I have to go onsite to configure an ASA 5516-X to replace the client's exisiting firewall.
1. I need to install FirePower, Advanced Malware Protection, IPS and URL Filtering.
2. Configure IPS so that traffice from the internet goes into the IPS and to the destination
3. Configure Mgmt interface at GigabitEthernet 0/1 - Do i need to configure using same IP Subnet or different?
4. How to send traffic from ASA to FirePower and FirePower back to ASA
5. Configure vlan for dmz interface for a newly purchased server
Can anyone point to me on where I can get a crash course to configure the ASA 5516-X for 30 May's deployment?
Tomorrow I have to go onsite to configure an ASA 5516-X to replace the client's exisiting firewall.
1. I need to install FirePower, Advanced Malware Protection, IPS and URL Filtering.
2. Configure IPS so that traffice from the internet goes into the IPS and to the destination
3. Configure Mgmt interface at GigabitEthernet 0/1 - Do i need to configure using same IP Subnet or different?
4. How to send traffic from ASA to FirePower and FirePower back to ASA
5. Configure vlan for dmz interface for a newly purchased server
Can anyone point to me on where I can get a crash course to configure the ASA 5516-X for 30 May's deployment?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Is IPS, AMP and URL filter management, the same as FirePOWER interface management?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
You are right I am biting more than I can chew.
I am a bit lost on the ASA Mgmt port as the SFR's mgmt port?
I thought both mgmt ports are configured using different IP addresses?
I am a bit lost on the ASA Mgmt port as the SFR's mgmt port?
I thought both mgmt ports are configured using different IP addresses?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
The ASA iOS is ver 9.6
My colleague is trying to configure crypto isakmp policy 10, and it displays this error message:"invalid input detected"
My colleague is trying to configure crypto isakmp policy 10, and it displays this error message:"invalid input detected"
ASKER