<div>
Thanks a lot, works like a charm now!
</div>


<div>
You're quite welcome... glad you are all up and running now!
</div>


You're quite welcome... glad you are all up and running now!

<div>
<div class="content wysiwyg-content">
Hi, I've purchased 4 Sonicwall(Dell) Sonicpoint ACi units, connected to my Sonicwall NSA2600 firewall (WLAN port X4). Everything's working fine using PoE injectors (+ unmanaged switch) but I'm not able to get it working using a UniFi POE-150W PoE switch. All requirements describled here <a href="https://support.sonicwall.com/sonicwall-sonicpoint-series/kb/sw12867" rel="ugc">https://support.sonicwall.<wbr />com/sonicw<wbr />all-sonicp<wbr />oint-serie<wbr />s/kb/sw128<wbr />67</a> are met, the switch supports 802.3at and max output pr port is 34W (min is 25 or 30 W). I'm able to connect to the WLAN (set up as virtual APs) but I'm not able to connect to internet, not getting IPs from DHCP. Any ideas how to solve this? (in my head this should be straightforward, maybe I'm wrong?)
</div>
</div>


Hi, I've purchased 4 Sonicwall(Dell) Sonicpoint ACi units, connected to my Sonicwall NSA2600 firewall (WLAN port X4). Everything's working fine using PoE injectors (+ unmanaged switch) but I'm not able to get it working using a UniFi POE-150W PoE switch. All requirements describled here https://support.sonicwall.com/sonicwall-sonicpoint-series/kb/sw12867 (https://support.sonicwall.com/sonicwall-sonicpoint-series/kb/sw12867) are met, the switch supports 802.3at and max output pr port is 34W (min is 25 or 30 W). I'm able to connect to the WLAN (set up as virtual APs) but I'm not able to connect to internet, not getting IPs from DHCP. Any ideas how to solve this? (in my head this should be straightforward, maybe I'm wrong?)

Sonicpoint ACi and PoE switch

Wireless networking is anything related to the transfer of data between two (or more) devices without the use of a physical connection, ranging from getting advice on a new Bluetooth headset to configuring sophisticated enterprise level networks.

Wireless Networking

SonicPoint

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).

DHCP

SonicWall

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

unifi

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.