<div>
Late response though :)<br />
<br />
<a href="https://www.openattic.org/" rel="ugc">https://www.openattic.org/</a>
</div>


Late response though :)

https://www.openattic.org/ [https://www.openattic.org/]

<div>
<div class="content wysiwyg-content">
Hello,<br />
We are looking for ceph admin or consultant who can guide us. Maybe someone here can tell us us if we can mix SSD and SATA in the same stroage and if there is any GUI. <br />
<br />
&nbsp;3 nodes of Supermicro 12bay server with raid card and 4x1Gig nic<br />
6x 1tb ssd &nbsp;+ 6 x 3tb sata <br />
Is there any GUI for CEPH to manage &amp;&nbsp;monitor the volumes and disks?<br />
Maybe some CEPH appliance available?<br />
Thanks in advance.
</div>
</div>


Hello,
We are looking for ceph admin or consultant who can guide us. Maybe someone here can tell us us if we can mix SSD and SATA in the same stroage and if there is any GUI. 

 3 nodes of Supermicro 12bay server with raid card and 4x1Gig nic
6x 1tb ssd  + 6 x 3tb sata 
Is there any GUI for CEPH to manage & monitor the volumes and disks?
Maybe some CEPH appliance available?
Thanks in advance.

Ceph deployment and GUI to manage

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.