Link to home
Start Free TrialLog in
Avatar of ITsolutionWizard
ITsolutionWizardFlag for United States of America

asked on

Dell poweredge t110

I have this server with 1 tb x 4. Inside I have 4 cables in one
I also have another 1 tb

How to raid all five in one?

In F2, three is option to select raid with 4 drives by a click
ASKER CERTIFIED SOLUTION
Avatar of PowerEdgeTech
PowerEdgeTech
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of ITsolutionWizard

ASKER

I don't understand the first paragraph. Sorry
Then ignore it. You configure RAID in the S100 by booting to the CTRL-R utility during POST.
F2 allow me to change sas to raid from auto

Is it controller 100? Or u suggest me not to use it n
Use os to raid them?

Actually, thus is esx vm server so I am not sure I can raid it after the esx software is installed
You can't use ESX on an S-series controller anyway.
Avatar of Member_2_231077
Member_2_231077

Can't use software RAID on ESX either :(