Link to home
Start Free TrialLog in
Avatar of John Mahoney
John Mahoney

asked on

Setting up a NAT Network with Static IP's

I had this question after viewing Setting up Network using VMware 12 Pro Workstation without using AD or a Domain.
This is somewhat related. If I setup a NAT LAN how can I use static IP's on one of the machines? I want one machine to always have the same address on the network but when I tried to do this I lost internet connection.
ASKER CERTIFIED SOLUTION
Avatar of David Johnson, CD
David Johnson, CD
Flag of Canada image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Can you give your configuration? Or at least some of it? It's very difficult to say what is going on without an idea of this.
Your question is not clear on which system do you want to set the static ip.

You have a host, do the VMs bridge the host connection to get an IP on the physical LAN or does the host have a virtual switch assigning IPs that ..... And that is
Avatar of John Mahoney
John Mahoney

ASKER

I'm sorry for the lack of information. I setup my network using NAT and I was using the wrong gateway. I thought I should use my routers gateway but it turns out I needed to use the gateway that the NAT router sets up. Thank you
It was my gateway settings. Thank you