<div>
I thought about what you said and rather than give you the commands I'll paste a little link with some explantion about vlans while it provides commands and example config for you to get you up to speed <br />
<a href="http://www.computernetworkingnotes.com/ccna-study-guide/vlan-configuration-commands-step-by-step-explained.html" rel="ugc">http://www.computernetworkingnotes.com/ccna-study-guide/vlan-configuration-commands-step-by-step-explained.html</a>
</div>


I thought about what you said and rather than give you the commands I'll paste a little link with some explantion about vlans while it provides commands and example config for you to get you up to speed
http://www.computernetworkingnotes.com/ccna-study-guide/vlan-configuration-commands-step-by-step-explained.html [http://www.computernetworkingnotes.com/ccna-study-guide/vlan-configuration-commands-step-by-step-explained.html]

<div>
<div class="content wysiwyg-content">
I have an Engenius EAP600 which I have configured only for Guest Wifi. I wanted to separate the clients that connect to that AP to only allow internet access and block any kind of local network access. The AP is connected to a Layer3 Cisco Switch which then connects to an ASA-5505 firewall. I'm a little rusty on VLAN could someone help with the commands for the Switch and the ASA to set this up?
</div>
</div>


I have an Engenius EAP600 which I have configured only for Guest Wifi. I wanted to separate the clients that connect to that AP to only allow internet access and block any kind of local network access. The AP is connected to a Layer3 Cisco Switch which then connects to an ASA-5505 firewall. I'm a little rusty on VLAN could someone help with the commands for the Switch and the ASA to set this up?

Separate Guest Wifi to only allow Internet access and block LAN access

VLAN

Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).

Cisco

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

Hardware-based firewalls provide more sophisticated protection for inbound and outbound traffic than the simple Windows software firewall or the basic NAT firewalls found in routers. These devices implement techniques such as stateful packet inspection, deep packet inspection, and content filtering; and may include built-in antivirus and anti-malware protection.