Link to home
Start Free TrialLog in
Avatar of Fernando Marambio
Fernando Marambio

asked on

VMware 6.0 not detechting Secondary Smart Array P400

Hello all,

I have a HP server DL 580 G5, running VMware vSphere 6 Essentials HP Custom version.
The hardware has 2 RAID controllers Smart Array P400. See attach.

Vsphere for some reason can only see the Embedded RAID controller and not the Controller in Slot 10.
I've tried to install the drivers manually but it doesn't seem to work.
However, If I install VMware version 5.5 it can see the controller in Slot 10.

Can some one point me or instruct me on how to inject or install the correct driver for RAID Controller in Slot 10?
I've included a few attachments. The one in question is vmhba4

Pls let me know if you need more information.

Thanks,
FernandoUser generated imageUser generated image
Avatar of Andrew Hancock (VMware vExpert PRO / EE Fellow/British Beekeeper)
Andrew Hancock (VMware vExpert PRO / EE Fellow/British Beekeeper)
Flag of United Kingdom of Great Britain and Northern Ireland image

Are all these devices on the HCL for 6.0 ?
Avatar of Fernando Marambio
Fernando Marambio

ASKER

What is HCL?
Check the VMware Hardware Compatability Lists HCL here

The VMware Hardware Compatibility List is the detailed lists showing actual vendor devices that are either physically tested or are similar to the devices tested by VMware or VMware partners. Items on the list are tested with VMware products and are known to operate correctly.Devices which are not on the list may function, but will not be supported by VMware.

http://www.vmware.com/go/hcl
SOLUTION
Avatar of Member_2_231077
Member_2_231077

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Thank you all.  I will investigate and report back sometime today.
Do you require any more additional help from Expert Exchange Experts, so you have the knowledge to be able to select a solution and close the question, which is the expected behaviour at Experts Exchange when a Question has been asked.
ASKER CERTIFIED SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
After researching the information posted by other users I discovered that it was much easier to use an older version than to move forward with the latest update