mallony
asked on
How do I access my Switches using a program callled "Putty.exe"?
Hi All,
I have two HP Switches model HP 3800 and I want to login into them so I can see its configuration. I have a program called "Putty.exe" but the previous network engineer uses this program to connect to our switches (HP and Cisco switches).
I watch some videos but I am not really sure how to use. Any advice?
I have two HP Switches model HP 3800 and I want to login into them so I can see its configuration. I have a program called "Putty.exe" but the previous network engineer uses this program to connect to our switches (HP and Cisco switches).
I watch some videos but I am not really sure how to use. Any advice?
If SSH is enabled on switches, you should enter IP address of switch and port number 22 in putty.
ASKER
How do I find out the IP address from my switches?
there is any command prompt?
Please NOTE: we do not have a server and we are connected to our switches. our server is on the Citrix environment. (server in the cloud).
there is any command prompt?
Please NOTE: we do not have a server and we are connected to our switches. our server is on the Citrix environment. (server in the cloud).
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Hello , you can connect directly to the switch by aux port , you need to have a serial port on the pc and a cable provided with the switch .
if want to connect by ssh , you can use an ip scanner to look for you switch IP
if want to connect by ssh , you can use an ip scanner to look for you switch IP
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.