Link to home
Start Free TrialLog in
Avatar of Todd Willoughby
Todd Willoughby

asked on

Connect Dell PowerConnect 2724 to Cisco 3560G

I am attempting to connect a Dell PowerConnect 2724 on port 24 to Cisco 3560G on port Gi0/3. I want to be able to pass through traffic from VLANs 30 and 34 which already exist on the Cisco switch. How do I need to configure the ports I mentioned above? Basically we are using this switch in our location to connect laptops to do imaging and other work. Thank you for any help you can provide!
Avatar of James H
James H
Flag of United States of America image

Configure the Cisco 3560 in a trunk port and specifying the VLAN's you want to pass through that port.
If you need examples, let me know.
Avatar of Todd Willoughby
Todd Willoughby

ASKER

Well, I did that but it didn't work.
I have tried the following things:
Gi0/3 trunked, native vlan 1 to port 24 tagged PVID 1
Gi0/3 trunked, native vlan 34 to port 24 tagged PVID 34
Gi0/3 trunked, native vlan 1 to port 24 untagged PVID 1
Gi0/3 trunked, native vlan 34 to port 24 untagged PVID 34
Gi0/3 access vlan 34 to port 24 tagged PVID 34
Gi0/3 access vlan 34 to port 24 untagged PVID 34
ASKER CERTIFIED SOLUTION
Avatar of James H
James H
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Thanks this seems to have resolved the issue.