Link to home
Start Free TrialLog in
Avatar of Dextor03
Dextor03

asked on

Set up multiple Static IPs on a TP-Link VR600

I have a TP Link VR600 that is connected via VDSL using PPPoE to our ISP. I have a /29 IP Address range from the ISP. I have two clients on site and each client has a static IP. My issue is that I am unsure on how to do set it up to workl with the VR600. I had a ZyXel P-870H and this worked fine but the ZyXel has run into problems and is no longer active. The VR600 is picking up the first IP in the address range - .17. I am unsure how to set it up so that the two different clients .19 and .20 can connect to it and the outside world. This area is not my strongest and any help would be greatly appreciated! Let me know if this is even possible with the VR600 or if I need to provide any additional information.
Avatar of John
John
Flag of Canada image

What we do at our clients is put a small 8-port fast switch in front of the Modem and then use a different VPN router for each IP address. This provides flexibility and works very well.
Avatar of Kimputer
Kimputer

Looking at the config pages of the VR600, it's too limited in functionality, and what you wish is NOT possible. A good price/performance method to get this working with only one router, is the get a similar Zyxel again, or alternatively a Draytek Vigor router.
Avatar of Dextor03

ASKER

Thanks. I put the VR600 in "Bridge" mode and used a firewall to do what was needed. Everything working again for me now.
This question needs an answer!
Become an EE member today
7 DAY FREE TRIAL
Members can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.