Vijay Kumar Gajula
asked on
No FLZ in new ADC 2016
I added new ADC win 2016 to Win 2008 R2 DC. both DFL & FFL win 2008. I migrated frs to DFRD.. everything is working fine. But DNS forward lookup zone is not replicated where as reverse lookup zone is present in win2016 ADC... please let me know what should be the issue.
thanks
thanks
ASKER
thanks for post. without doing anything reverse lookup zone is replicated but forward lookup zone is not replicated after promoting the adc
Reinstall DNS server role in Sever 2016 and Try
You can try the below, but not sure whether it will work as all my DNS servers are also DC's so replication works out of the box.
Open DNS on the server with the most up-to-date records
Right click on each of your forward lookup zones and got to 'Properties'
Select the 'Zone Transfers' tab
Check 'Allow zone transfers'
Select 'Only to servers listed on the Name Servers tab' (check the 'Name Servers' tab to make sure your DNS servers are in this list)
Otherwise select 'Only to the following servers' and then specify your servers
Give that a shot and see how you go!
Open DNS on the server with the most up-to-date records
Right click on each of your forward lookup zones and got to 'Properties'
Select the 'Zone Transfers' tab
Check 'Allow zone transfers'
Select 'Only to servers listed on the Name Servers tab' (check the 'Name Servers' tab to make sure your DNS servers are in this list)
Otherwise select 'Only to the following servers' and then specify your servers
Give that a shot and see how you go!
ASKER
I am getting the error as " The server with this IP address is not authoritative for the required zone"
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Check the properties of your forward lookup zone - is it AD-integrated (it should be). If not, change it so it is.
Have you checked your event logs for errors?
What's the status of repadmin /showrepl?
Have you checked your event logs for errors?
What's the status of repadmin /showrepl?
ASKER
Thanks
Follow it
https://www.petri.com/configure-forward-reverse-lookup-zones-in-windows-server-2008-r2-2012
Thanks,