Bobby White
asked on
Cisco VG224 and Asterisk (FreePBX)
Can anyone help me get a VG224 configured with FreePBX? Here is the ios config I am working with, and i will need info on how to setup FreePBX (or Asterisk) to use the VG224.
!
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname msr-vg01
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 this.is.the.enable.secret
enable password this.is.the.enable.password
!
no aaa new-model
ip source-route
no ip routing
!
no ip cef
!
!
no ipv6 cef
!
!
!
!
!
voice call send-alert
voice rtp send-recv
!
voice service pots
!
voice service voip
fax protocol pass-through g711alaw
modem passthrough nse codec g711alaw
sip
bind control source-interface FastEthernet0/0
bind media source-interface FastEthernet0/0
!
voice class codec 1
codec preference 1 g711alaw
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
!
application
service dsapp
param callWaiting TRUE
param callTransfer TRUE
!
global
service default dsapp
!
!
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
ip address 10.0.0.2 255.255.252.0
no ip route-cache
duplex full
speed auto
!
interface FastEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
!
!
snmp-server community public RO
!
control-plane
!
!
voice-port 2/0
ring cadence pattern11
alt-battery-feed feed2
cptone GB
timeouts call-disconnect 5
timing hookflash-in 110 70
impedance complex1
station-id name Port 0
station-id number 7101
caller-id enable
caller-id alerting line-reversal
!
voice-port 2/1
ring cadence pattern11
alt-battery-feed feed2
cptone GB
timeouts call-disconnect 5
timing hookflash-in 110 70
impedance complex1
station-id name Port 1
station-id number 7102
caller-id enable
caller-id alerting line-reversal
!
voice-port 2/2
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
!
!
mgcp profile default
!
!
!
banner exec ^C
----------------------------------------------------------------------------
--- UNAUTHORIZED USE MAY RESULT IN CIVIL AND/OR CRIMINAL PROSECUTION ---
----------------------------------------------------------------------------
This is a private computing system for use only by authorized users.
If you do not have authorization, discontinue at once.
Your use of this system, and all information or communications stored or
transmitted on it by you, with or without authority, or in excess of your
authority, is subject to review, monitoring, and recording by system
personnel, without notice or permission. Any information or data thus
obtained by system personnel also is subject to review by law enforcement
and judicial officials in connection with the investigation or prosecution
of possible criminal activity involving the system.
If you now continue use of the system, you expressly consent to these
conditions of use.
----------------------------------------------------------------------------
^C
!
line con 0
line aux 0
line vty 0 4
password put.login.password.here
login
transport input all
!
end
You need to follow pbx document carefully
ASKER
Thank you A Q Choudary, but I ended up figuring it out on my own. I even wrote up a tutorial for others that have the same problem.
http://robertmartinwhite.blogspot.com/2017/09/using-cisco-vg224-analog-voice-gateway.html
http://robertmartinwhite.blogspot.com/2017/09/using-cisco-vg224-analog-voice-gateway.html
This question needs an answer!
Become an EE member today
7 DAY FREE TRIALMembers can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.