<div>
Network bit if you are using Cisco switches<br />
<a href="https://www.cisco.com/c/en/us/td/docs/server_nw_virtual/commercial_host_driver/boib_linux/user/guide/boibli32/boot.pdf" rel="ugc">https://www.cisco.com/c/en/us/td/docs/server_nw_virtual/commercial_host_driver/boib_linux/user/guide/boibli32/boot.pdf</a>
</div>


Network bit if you are using Cisco switches
https://www.cisco.com/c/en/us/td/docs/server_nw_virtual/commercial_host_driver/boib_linux/user/guide/boibli32/boot.pdf [https://www.cisco.com/c/en/us/td/docs/server_nw_virtual/commercial_host_driver/boib_linux/user/guide/boibli32/boot.pdf]

<div>
<div class="content wysiwyg-content">
Hello,<br />
<br />
Would anyone know where in DHCP (I'm assuming the issue is here) to indicate where clients should connect for a PXE boot? Initially, I was using &nbsp;a server (Let's call it WDSSVR1) as a WDS/MDT server to deploy images across the network. I had planned on migrating the role to a different server with SCCM installed (SCCMSVR1), but after playing around with it, I decided to go back to WDCSVR1. However, it looks like DHCP automatically picked up on SCCMSVR1 as the WDS server and has not changed back to the old one. Clients are still picking up on the SCCM server.<br />
<br />
I've tried reinstalling WDS and MDT on the previous server in hopes that the settings would automatically update again, but it hasn't helped. <br />
<br />
Thanks for any help you can provide.
</div>
</div>


Hello,

Would anyone know where in DHCP (I'm assuming the issue is here) to indicate where clients should connect for a PXE boot? Initially, I was using  a server (Let's call it WDSSVR1) as a WDS/MDT server to deploy images across the network. I had planned on migrating the role to a different server with SCCM installed (SCCMSVR1), but after playing around with it, I decided to go back to WDCSVR1. However, it looks like DHCP automatically picked up on SCCMSVR1 as the WDS server and has not changed back to the old one. Clients are still picking up on the SCCM server.

I've tried reinstalling WDS and MDT on the previous server in hopes that the settings would automatically update again, but it hasn't helped. 

Thanks for any help you can provide.

Update WDS server information in DHCP

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).