Aamir Hussain
asked on
RECOVER DATA FROM DAMAGED BIT-LOCKER DRIVE
I have 1 TB external hard disk and it was encrypted by Bit locker. I start decryption of drive and process of decryption stops at 94 % due to the electric power problem. When I plug in drive again in my computer then I was unable to pause or resume decryption process and drive became inaccessible.
I tried to google for solution and I got a solution on Microsoft site for Recovery of data
I used BitLocker Recovery Tool " repair-bde" .Initially, the process of recovery starts normally when I checked after 14 hours, I saw process was stuck at 10 % only. I restarted my laptop.
After restart hard drive light is being ON and drive is generating a light beep on start but not showing on the computer .
Is there anyway to recover data ??
I tried to google for solution and I got a solution on Microsoft site for Recovery of data
I used BitLocker Recovery Tool " repair-bde" .Initially, the process of recovery starts normally when I checked after 14 hours, I saw process was stuck at 10 % only. I restarted my laptop.
After restart hard drive light is being ON and drive is generating a light beep on start but not showing on the computer .
Is there anyway to recover data ??
You will probably need a Recovery Service for this.
I don't know where you're located, but there's a company called DriveSavers that I worked with for years when I was a tech. They're pretty good, but they're pricey.
You can Google for a local recovery company (to you). They are pretty pricey if they are decent experts. So you need to determine if the data is that important.
ASKER
Is there any HARDWARE available which can recover data from drive ?? I did google for this and I found many results that there is hardware available which can automatically recover data using hard disk platters.
I am unable to determine specific hardware.Kindly guide me about this.
I am unable to determine specific hardware.Kindly guide me about this.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
THANKS FOR GIVING EXPERT GUIDE.