Link to home
Start Free TrialLog in
Avatar of fieldj
fieldjFlag for United Kingdom of Great Britain and Northern Ireland

asked on

Extreme Switch stack - help to identify VR-Default configuration

Hi,

Earlier this week we switched ISP's and started to use a new physical router with a different IP address on our lan.

At the same time we updated the default route on the Extreme switch so that it used the IP address of this new router as its gateway (therefore internet traffic goes out via this new router) .   The default route on the extreme switch is configured to use the "VR-Default" VR.

Everything has gone well with our production network, but we also have WiFi connections on a number of different  IP ranges (away from our production network).  We are unable to get an internet connection to clients on these WiFi networks.

These WiFi networks are also configured to use a different gateway (with an Ip in the range of the network) which ultimately returns them back to the the Extreme switch.  These WiFi networks/routes are also configured to use the "VR-Default" VR.

I would like to understand how I can examine the details/configuration of the 'VR-Default' VR to understand what IP address it is using to route out to the internet on.
ASKER CERTIFIED SOLUTION
Avatar of fieldj
fieldj
Flag of United Kingdom of Great Britain and Northern Ireland image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial