• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 55
  • Last Modified:

Cisco 1250 serial AP to configure captive portal

hello experts
i have some old Cisco autonomous AP, such as Cisco 1250, 1260, 2602 serials, looks like it is not support to configure captive portal authentication, although i have upgrade them to the last software version, because i need setup a wireless network for guest users.
please kindly let me know it is possible or not.

thanks
0
beardog1113
Asked:
beardog1113
  • 2
  • 2
1 Solution
 
Craig BeckCommented:
It is possible if you use a captive portal which runs on a gateway device.
0
 
beardog1113Author Commented:
for i have several offices need setup like this, so i need a centralized captive portal to do this, so looks like it is not possible for me right?
thanks
0
 
Craig BeckCommented:
It depends.  If you can tunnel your traffic to a central location you could do it.

Alternatively, buy a Cisco 2504 WLC (if you have less than 75 APs and 1000 clients) and use Local Web Auth at the WLC.  Convert the APs to lightweight and join them to the WLC.  Configure Web-Auth for the SSID.
0
 
beardog1113Author Commented:
thanks
0

Featured Post

SMB Security Just Got a Layer Stronger

WatchGuard acquires Percipient Networks to extend protection to the DNS layer, further increasing the value of Total Security Suite.  Learn more about what this means for you and how you can improve your security with WatchGuard today!

  • 2
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now