jonathanrklein
asked on
How to boot an HP 5120 48-port switch with no software on the flash?
I was updating the Comware for my HP A5120-48G-PoE+ EI switch. Its model number is JG237A. I deleted the old comware version with the command delete /unreserved flash:/....
I accidentally powered down the HP switch and turned it back on. It brought me to the boot menu. I displayed the files in flash and there was no comware boot software file in flash. I tried all the options necessary to get the new flash on the switch.
What else should I do?
I accidentally powered down the HP switch and turned it back on. It brought me to the boot menu. I displayed the files in flash and there was no comware boot software file in flash. I tried all the options necessary to get the new flash on the switch.
What else should I do?
hold ctrl -b as the switch boots and upload the new firmware via tftp.
ASKER
If I press option 5. Restore to factory default configuration. It just takes me back to the BOOT MENU. I selected option 3. Display all files in flash and the only files that I have are private-data.txt, startup.cfg, system.xml. I don't have a .bin comware file.
Should I select option 1) Download application file to flash with the current software? I don't believe the switch has an IP configured on it.
Should I select option 1) Download application file to flash with the current software? I don't believe the switch has an IP configured on it.
Agree with Richard. Put the firmware (or whatever image you have backed up) on your tftp server then point the switch to it
download the firmware it will give you the option to IP the switch and connect to tftp server.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Seems like a long arsed way of doing it but it got the job done. good for you =)
ASKER
I spoke with my archtitect about this and he told me to try XMODEM. I adjusted the baudrate on the switch and network terminal to 115200 to increase the transfer speed.
https://community.hpe.com/t5/Comware-Based/Resetting-5120-to-default-factory-settings/td-p/6020893