Richard Brodean
asked on
Cisco ASA 5520 and FiOS DHCP config
Hey gang,
I'm trying to figure out how to get my ASA connected to my residential FiOS correctly. I've read different posts where you have to create a VLAN and assigned the cloned MAC address to it and assign the outside interface to that VLAN to get DHCP. Other posts say you can put the mac-address command on the outside interface itself. Conflicting information here. I've read to use ip route 0.0.0.0 0.0.0.0 dhcp or a setroute command not sure which to go with, or will they achieve the same thing.
Anyone have a scrubbed working config for their ASA --> FiOS that I can take a look at? If not, point me in the right direction?
Here is my outside interface config so far from what I've come across:
interface GigabitEthernet0/0
mac-address 0c8d.db8f.3c98
nameif FiOS_Outside
security-level 0
ip address dhcp setroute
Running ASA 5520 on version 9.1(7)19.
Be easy one me, not used to setting it up in a DHCP fashion. TIA
I'm trying to figure out how to get my ASA connected to my residential FiOS correctly. I've read different posts where you have to create a VLAN and assigned the cloned MAC address to it and assign the outside interface to that VLAN to get DHCP. Other posts say you can put the mac-address command on the outside interface itself. Conflicting information here. I've read to use ip route 0.0.0.0 0.0.0.0 dhcp or a setroute command not sure which to go with, or will they achieve the same thing.
Anyone have a scrubbed working config for their ASA --> FiOS that I can take a look at? If not, point me in the right direction?
Here is my outside interface config so far from what I've come across:
interface GigabitEthernet0/0
mac-address 0c8d.db8f.3c98
nameif FiOS_Outside
security-level 0
ip address dhcp setroute
Running ASA 5520 on version 9.1(7)19.
Be easy one me, not used to setting it up in a DHCP fashion. TIA
This question needs an answer!
Become an EE member today
7 DAY FREE TRIALMembers can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.
If you want to use the FIOS router as a wireless access point, give the LAN side of the FIOS router an address on the same subnet as the LAN side of the 5520, turn off DHCP on the FIOS router, and connect the LAN side of it to the LAN side of the 5520.