Link to home
Start Free TrialLog in
Avatar of beardog1113
beardog1113Flag for China

asked on

ESXi 6.0 with Dell R610, 2TB storage limitation

hello experts
I have a Dell R610 and PERC H700 as the disk controller, I did build up a RAID 6 with about 7TB storage space, ESXi 6.0 installed on it but the storage limitation still 2TB, as i know ESXi 6.0 already extend the limitation to 64TB, so whats wrong in my case and how to fix it?

thank you
Avatar of Ajay Chanana
Ajay Chanana
Flag of India image

Did we extended it from storage and vsphere side both ?

Did you got any error on increasing - could you please share screenshot for where do you see the limitation.
Avatar of beardog1113

ASKER

hello
sorry i am not make sense whats your mean, the total storage space is 7TB, via vsphere i can see the capacity is also 7TB but size limitation is 2TB.

thank you
attach a screen shot for your reference.
thank you
User generated image
How do you have your Boot Mode set in the Setup F2 utility? BIOS or UEFI?
ASKER CERTIFIED SOLUTION
Avatar of Ajay Chanana
Ajay Chanana
Flag of India image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
why are you installing ESXi on spinny disks to start with, it's much better and easier to install ESXi on a USB flash drive or SD card, and leave the entire 7TB RAID 6 array for your VMFS datastore.

ESXi was designed to be installed in embedded mode.
I noticed your file system is 5.61 you might want to go to VMFS 6.  Did you create the volume in the thick client or web client because the thick client limits you to 2TB.
yes, just ignore it