troubleshooting Question

VMWare hardware health monitoring using SNMP

Avatar of Dark dns
Dark dnsFlag for Netherlands asked on
VMware* SNMP* Monitoring toolHardware
2 Comments1 Solution151 ViewsLast Modified:
Hi everybody,

I'm not really familiar with SNMPwalks and OID's, but I have a tool that can check an SNMP OID value and trigger me if that value changes or is not equal to the value that I want.

I want to be able to find my RAID-controller / Storage health using SNMP. I have a HP server where I've installed the HP Offline Bundle and I can do an SNMPwalk. In VMWare itself I can see that the storage and the system health gives me a warning when I take 1 disk out.

How do I find the OID which is responsible for this when using VMWare with the HP ESXi offline bundle installed ?
I tried finding it on the internet, but I can't find what I'm looking for.

Thank you,

Dennis
ASKER CERTIFIED SOLUTION
Ajay Chanana
MCSE-2003/08|RHCSA| VCP5/6 |vExpert2018
Join our community to see this answer!
Unlock 1 Answer and 2 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 2 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros