asked on
Setup new firewall for Remote Web Access
Client has small NT network with 1 SBS 2011 server as AD, FS, everything (Exchange disabled - use Office 365 now). Remote employees access the Shared files thru https://mail.xxxxxx.com/remote. Upgraded firewall from a Sonicwall TZ105 to a Draytek 2960. I have opened ports 443, 987 and 1723 and we still can not get into the Remote Web Access. What step am I missing? Thx for your help.
* DrayTekSBSNetworkingSonicWallHardware Firewalls
Last Comment
xav1963
You said you opened the firewall, but did you create NAT rules?
ASKER
All i have done in the Draytek is go under NAT> Port Redirection > One to One> Public Port and Private Port the same >443,987 and 1723 and select Private IP. Where else should i go?
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Have used a smaller Draytek before and that is how I did it. But this model has no "Open Ports" tab under NAT... just Port Redirection, Server Load Balance, DMZ Host, ALG and Connection Timeout. Can;t find "Open Ports" anywhere. Firmware is up to date. ???
ASKER
Got it... Had to change default ports under Management to start working... thanks.