<div>
As far as I know I have only done this via the Cisco IOS CLI. It is easy to do once you have the CLI connected. &nbsp;<a href="https://www.cisco.com/c/en/us/td/docs/wireless/access_point/2600/quick/guide/ap2600getstart.html#pgfId-37440" rel="ugc">Configuring DHCP Option 43 and DHCP Option 60</a> (Scroll down or click the Configuring DHCP Option 43 and DHCP Option Link)<br />
<br />
Edit: <a href="https://supportforums.cisco.com/t5/wireless-mobility-documents/configuring-dhcp-option-43-and-option-60/ta-p/3143572" rel="ugc">Reference: info for DHCP Option 43 vs 60</a>
</div>


<div>
APs don't have any DHCP relay functions. They are layer2 devices. &nbsp;DHCP packets pass straight through so look at the router if the client is on a different subnet to the DHCP server. <br />
<br />
Is the AP joined to a controller or is it standalone?
</div>


<div>
Yes possibly a switch with DHCP relay enabled. I will check on that
</div>


<div>
<div class="content wysiwyg-content">
Hi Experts,<br />
<br />
I am trying to change where the Cisco Aironet 2600 gives out IP addresses from. It is setup to give out IP addresses from Windows DHCP server but I am not able to find the option in the UI to point it to the new server. Can someone with this UI advise please?<br />
<br />
Thanks
</div>
</div>


Hi Experts,

I am trying to change where the Cisco Aironet 2600 gives out IP addresses from. It is setup to give out IP addresses from Windows DHCP server but I am not able to find the option in the UI to point it to the new server. Can someone with this UI advise please?

Thanks

Cisco Aironet 2600

Wireless networking is anything related to the transfer of data between two (or more) devices without the use of a physical connection, ranging from getting advice on a new Bluetooth headset to configuring sophisticated enterprise level networks.