How to setup SNMP

Berry King
Berry King used Ask the Experts™
Inherited Avigilon camera system.  I see that after logging into the camera I can configure SNMP.  What do I need to do to get this to work with solarwinds .
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Senior Systems Administrator
1. Configure the device to send SNMP traps to the IP address assigned to the Orion server.

2. Make sure the UDP port 162 is open for IPv4 and IPv6.

3. When you use SNMPv3 for polling a device and receiving traps from it, confirm that the same authentication type (auth, noauth, or priv) is configured for both polling and traps.

Edit: Here is some more information about configuring alerts. Configure Trap Viewer filters and alerts


Thank you for your help
ITSysTechSenior Systems Administrator

Your welcome.

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial