Improve company productivity with a Business Account.Sign Up

x
  • Status: Open
  • Priority: High
  • Security: Public
  • Views: 118
  • Last Modified:

DSCP QOS CS3/24 & 46 on Cisco 3850 Switch port - VOIP

We have configured QOS on all HP Procurve LAN switches as CS3/24 & 46 priority 7 for VLAN 90 (Voice VLAN)

VLAN90 is configured on Cisco 3850 and interface on VLAN90 running to additional WAN connection for VOIP traffic.

How do I enable CS3/24 & 46 QOS on the Cisco core switch to maintain the QOS tags across to the WAN gateway (also configured for CS3/24 & 46)

Thanks.
0
BJMagill
Asked:
BJMagill
2 Comments
 
kevinhsiehCommented:
DSCP tags are part of the IP packet, so they will remain with the traffic as long as some device doesn't deliberately change them.

You should have a QoS queuing policy any time you go from a higher speed interface to a lower speed one. This could be at a switch or router.
0
 
BJMagillAuthor Commented:
Although that does make sense do we not need to add something in the config to honour the QOS traffic based on the tags?
0

Join & Write a Comment

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Tackle projects and never again get stuck behind a technical roadblock.
Join Now