Link to home
Start Free TrialLog in
Avatar of Elefanten123
Elefanten123

asked on

Direct access IPHTTPS error 0x800b010f

Hi

I have a test AD and a Direct Access test server for testing purposes running Windows 2012 R2.

After deploying DA using the wizard and everything is green on the Direct Access server in Dashboard view.
I am using 1 NIC setup with NAT (Behind an edge Device with single network adapter) and only want to test IP-HTTPS.

Testing a Win10 Client connected and joined to the test domain, policies is received but i can not Connect.
The IP Connectivity test fails with error code 0x800b010f when i use DA Client troubleshooting tool.
It seems it is related to something with Certificate, the Certificate i use is from an internal CA server i setup and using for testing.


BR
Elefanten
DA-HTTPS-error.jpg
Avatar of Cliff Galiher
Cliff Galiher
Flag of United States of America image

Did you properly port forward 443 on the edge device?  Usually a certificate error would represent differently. This looks simply like a failed connection, which is almost always the edge device.
ASKER CERTIFIED SOLUTION
Avatar of Elefanten123
Elefanten123

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
No comment has been added to this question in more than 21 days, so it is now classified as abandoned.

I have recommended this question be closed as follows:

Accept: Elefanten123 (https:#a42411540)

If you feel this question should be closed differently, post an objection and the moderators will review all objections and close it as they feel fit. If no one objects, this question will be closed automatically the way described above.

seth2740
Experts-Exchange Cleanup Volunteer