windows 10 enterprize remove my username from logon when i log in?

Do you want to have an auto-login or to keep the last logon username?

autologin  and no need to put password there, just autologin and also make windows 10 loading faster, is loading for too much time and then my username appear and i must put the pass there and then sign in and i want to change this, yes!

To speed up the windows start depends on your BIOS. Go to BIOS and setup start from HDD and first selection should be your PC HDD (usually SATA 0). Some motherboards have option fast boot and x-fast boot. Test both and see the difference. Do not apply more than one change in BIOS before the restart, because if you are not experienced with the BIOS config, you can easily return the setting back if your PC doesn't star on next restart.

thank you

i don't understand this step: To speed up the windows start  , setup start i don't have setup start hdd on bios, my english is bad plz tell me exactly the step

BIOS is the software that starts before Windows. There is a section called Boot Option where you specify which component should be read first. It is very risky to change the BIOS if you do not understand the config options because your computer might stop working after it. If you are happy with current speed than it is fine.
What is computer brand and model?

Lenovo Idealpad 320-15lKB and i installed windows 10 enteprize yesterday

another quesiton,when my laptop goes idle then logon username appears again and need to put password again to sign in

when I close the lid and leave it for 30 seconds and so long logon username appear again and need to put password

To get into the BIOS o that model you need a pin and you have to click it into the tiny hole next to the SD Card reader at the left side. The second option should be BIOS Setup. In to the setup, there must be the Advanced section where you can find the Boot Order in a menu. In to the boot order, you will see all available start options, and you should move HDD (SATA 0) at the top as first start choice. And then save and exit.
Do not change other settings because your laptop might not start on the next boot. Check this video, even is in Indian, but you will get a better idea.
https://www.youtube.com/watch?v=LKp7NDKDEMg

To change the screen locking, you should go to Search, type Control Panel, Power Option. You should change there in the options when is in power in the lid option do nothing when is closed and also extend the time for the screen server. Do not change the settings for the battery because that will save your battery life. Also, right-click on the desktop and go to personalize. In screen, server section check if you can untick password protected and that should not lock the screen with password again. If that is not working better stay as it is because change should be done in the registry and I think is not smart to take you there.

i saw the video to go to BOOT MANAGER i press F12 and i am there then i choose Sata HDD sau Sata 000? and that's it, i Hit Enter then laptop will boot faster?

No, you need SATA0 first. If there is no SATA than HDD or SSD. The USB is for the external HDD.

i have this options i can't find lid or screen saver i have this:

Turn on hard disk after :On battery minutes 10 and plugeed in: 20 min
sleep after ,on battery 15 min ,pluggedin 30 min

ok i am there look this snapshot
IMG_0276.jpg

ok i solved the problem with the lid i need only to solve the problem with screen saver and user: pass not appear again on logon

cnahge when computer go to sleep?

That is in the slip mode; screen server is part of the display or personalization. Right-click on the desktop, Personalize, Lock Screen, Screen Timeout setting, Change from 10 min to more

i found here LOCK screen turn on or off

yes yes what about boot ?you saw snapshot?

On lock screen-Screen Timeout setting- i have this, 4 options look snapshot plz:
On lock screen- screen saver- i have same options
IMG_0277.jpg

...

ok screen saver i set to 400 min ,also i untick ''On resume ,display logon screen''

i want to do all this with sleep etc becouse i play a lot fifa 2018 , i buyed yesterday this laptop and when i play i hope no screen svaers etc appears

Change only the settings on power. For sleep from 30min switch it to never. For locking the screen ether go to never or choose the maximum time if you do not want to lock. But remember only when is plugged in power option. On battery is saving your battery life.

what about boot? u saw the snapshot with Bios , i psot above!! is something that we can do about that?

here new settings for Power & Sleep:
IMG_0278.jpg

This is a choice when you would like to run manual location. Ex. If you would like to run image installation on the network or run the laptop from bootable external disk. But according to the order, I think the setting in the bios is as should be. Do not change anything there

and here Bios , boot manager:
IMG_0276.jpg

oook but are u sure i can't change any settings from inside? from windows 10 enterprize settings to load faster?

No, your laptop is now in optimal settings. Do not expect a lot of it. This model is very basic and is good for travelling only. Light, good for reading e-mails and browsing. This is not good for playing games nither for processing data or running complex applications.

Come on is not so bad, i have 8000 rams , processor 2,7 ghz --> 3,5 ghz pixel shader 5.0 or 5..1 not remember well and direxctX 12 and 1 T hdd   , i play pes 2018 and fifa 2018 ,Mortal Kombat X with no problems is also very good for gaming ,my ex pc was a trash, windows xp 578 rams , 2,2 ghz 200 gb hdd

is not loading hard loading in 10-15 sec i want to load in 2-5 sec hehe but ok maybe is not possible,thanks for everything

It is not loading because it might be not set up for UEFI secure boot enabled. I am afraid to give you a guide for it because if the HDD is installed with legacy drivers only, you will not be able to start windows.

yes yes is installed with legacy ....if i change to UEFI windows will not start , i receive a message like this: media not found
Under Uefi i have an option called: BOOT FASTER
but when i set LEGACY i don't have that option

if you manage to install UEFI drivers than you will be able to change the BIOS and start will be in 5 sec

i did this: with rufus i burned windows 10 enteprize on USB stick 3.0 i set boot to UEFI but windows not start so i tried first boot device LEGACY and worked well....what to do? reinstall windows? what is ur advice?install windows again using UEFI ?

I pressed F2 i go to boot menu and i set LEGACY then i plug in my USB  and i restart PC but instalation dones't start until  i  press F12 then i choose BOOT USB and windows start to install , you want to tell me that is better to choose UEFI from boot menu and install new copy of windows 10 ?

try this and check is it working:
https://www.intel.com/content/www/us/en/support/articles/000024558/memory-and-storage/intel-optane-memory.html

I never try this, and there is a risk to lose the data and must run reinstallation.

Definitely, you have to run bios with UEFI settings if you would like to get the fast boot.

I am going to sleep now.

how to install UEFI drivers?

ok thank you and good night ok i will take this  risk

will be much easier for me to choose from boot menu EUFI and then re-install windows 10 what u say about this?

ok i did what u said and i follow this steps i was lucky i didn't lose all my data,everything worked well,now i start bios in UEFI mode and i have Option: Fast Boot enabled too,i hope now everything will be faster,i atached a snapshot file , plz take a look:
IMG_0279.jpg

Are you on a domain? Using the enterprise edition suggests so. The selected solution "Click Windows key + R (together), paste the command netplwiz and press Enter" does not work on domain joined computers. There is simply no checkbox to activate auto-logon on domain joined machines. On these, we need an extra tool: https://docs.microsoft.com/en-us/sysinternals/downloads/autologon