HPE 120-8G Switch JG920A - Hp Layer 3 Switch

Dear Experts,

I have configured vlan10 (untagged) using port1 with IP - 119.75.60.0/24, (could not enter 119.75.60.180/30.).

I have a Cisco router 4321 connected at port1.

I configured vlan3 (untagged) on my port8 to 192.168.3.3/24 allocated port8 to my local network.

My firewall I added the static route -       

        a. Destination: 119.75.60.0/24 (Client's FW)
      b. Device / Interface: LAB-LAN
      c. Gateway: 192.168.3.3 (HP Switch)

But the FW is still not able to ping the internet
LVL 1
Anonymous KHIT EngineerAsked:
Who is Participating?
 
Don JohnstonConnect With a Mentor InstructorCommented:
(could not enter 119.75.60.180/30.)
Why could you not enter 119.75.60.180/30 as the address?

But the FW is still not able to ping the internet
Where is this firewall connected?  What is the IP address of the firewall?
0
 
Anonymous KHIT EngineerAuthor Commented:
Hi! Sorry,

It seems that the routing was done already. Thanks for replying.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.