WellingtonIS
asked on
Cisco Prime -Controllers and APs
I had to rebuild my Cisco Prime machine. Since then it's only seeing the AP's on one controller. I have about 250 APs currently that I can see on each controller. The tricky part of this is one controller has Software Version 8.0.133.0 and the 2nd controller has 8.2.141.0. I had to do this because we purchased new AP's and we haven't upgrades switches to support the newer APs so I've split them. Is there a way for the controller (Prime) to see both controller APs
Add the second WLC as a device to Prime.
ASKER
I did but it's not seeing the AP's on the 2nd device. It's strange.
ASKER
the device is added but the audit says:
WRMOISDAPCON2 AP 9c:57:ad:99:55:c0, Interface 802.11b/g Not Present in Prime Infrastructure
Which I don't understand because its syncs
WRMOISDAPCON2 AP 9c:57:ad:99:55:c0, Interface 802.11b/g Not Present in Prime Infrastructure
Which I don't understand because its syncs
You need TAC to look at that.
ASKER
Perhaps. We need to renew our contract with cisco
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
as soon as the contract can be renewed.