J G
asked on
Sonic Wall Setup vlans, multiple wifi channels
Uverse: 195.10.10.105
Sonic Wall TZ300w: 195.10.10.106 (gateway address: 192.168.1.1 for private subnet over x0 lan port)
I want to setup a guest wifi channel on the sonic wall that has no access to the 1.1 network
Then, I want to setup a hidden wifi channel on the sonic wall that has access to the 1.1 network.
Should I setup vlans for this?
vlan 1 - default - guest wifi
vlan 2 - private subnet assign to 2nd wifi channel.
I would like to set this up all behind the sonic wall, but If I can't have 2 channels, I suppose I can set a guest network up on the ATT router, although I would rather not do this.
Could someone walk me through the sonic wall setup?
Sonic Wall TZ300w: 195.10.10.106 (gateway address: 192.168.1.1 for private subnet over x0 lan port)
I want to setup a guest wifi channel on the sonic wall that has no access to the 1.1 network
Then, I want to setup a hidden wifi channel on the sonic wall that has access to the 1.1 network.
Should I setup vlans for this?
vlan 1 - default - guest wifi
vlan 2 - private subnet assign to 2nd wifi channel.
I would like to set this up all behind the sonic wall, but If I can't have 2 channels, I suppose I can set a guest network up on the ATT router, although I would rather not do this.
Could someone walk me through the sonic wall setup?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
1 vlan would be for wireless/guest
1 vlan would be a separate private internal network that has both wireless and hard wired -ethernet
1 vlan would be a separate private internal network that has both wireless and hard wired -ethernet
ASKER
Do I need to define the vlans in any other place? Could you walk me thru setting up the Vlans, then I will setup the virtual APs.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Do I need to define the vlans in any other place? Would I need to define 1 or 2 vlans? Could you walk me thru the vlan portion of the setup?