• Status: Solved
  • Priority: Low
  • Security: Public
  • Views: 1335
  • Last Modified:

WMware esxi 6.5: error :The portgroup for Network adapter 1, VM Network, could not be found. It has been assigned to VM Network.

When I want to create a new virtual machine I get the following error:  The portgroup for Network adapter 1, VM Network, could not be found. It has been assigned to VM Network.
0
Arian Fazlija
Asked:
Arian Fazlija
  • 6
  • 4
2 Solutions
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
What do your Virtual Machine Network Portgroups look like ?
0
 
Arian FazlijaAuthor Commented:
When it comes to wmware esxi 6.5 networking I have only limited knowledge that is my problem finding solution offline to tell me remove this check this doesn't help me much since I don't understand around that area much I can send you pictures if you want
26981429_897636777059625_2029061588_.jpg
0
 
Arian FazlijaAuthor Commented:
Wmware portgroups here is the picture
0
Problems using Powershell and Active Directory?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

 
Arian FazlijaAuthor Commented:
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Okay, so you have a Virutal Machine network portgroup called VM Network and New Port Group.

and you've created a new vSwitch.

What are you trying to do ?

The Defaults normally work okay, e.g. standard vSwitch and VM Network Portgroup, are you wanting to do something more adventurous ?
0
 
Arian FazlijaAuthor Commented:
That is my problem I did not touch a thing, after I wanted to create my fifth virtual machine I got this error and tried to fix this issue with the help of the internet, you have any idea of what I can do ?
0
 
Arian FazlijaAuthor Commented:
If you are willing to connect remotely I can share my id and password with you if not its not a problem. A person with your skills I think will not probably only 1-2 minutes to solve the problem.
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
This expert suggested creating a Gigs project.
Remove the virtual machine portgroup and remove the vSwitch, there are not required. e.g. reset to defaults.

I'm afraid all communications must be conducted through the forum, and not via remote access.

If you want someone to fix it, then I would recommend creating a Gig or Project here at EE.
0
 
Arian FazlijaAuthor Commented:
How can I turn the settings to default again ?
1
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Delete the vSwitch and Virtual Machine network you created ?

OR, you can connect to console, and select Reset to Defaults under Network ?
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

  • 6
  • 4
Tackle projects and never again get stuck behind a technical roadblock.
Join Now