new network design

I would trunk ALL nics, vmnic0, vmnic1 and vmnic2.

run VLANS 10,20,30,40,50 down all trunks.

and then the rest is okay.

Hi Andrew
sorry  but no idea what u mean  ?

I would trunk ALL nics, vmnic0, vmnic1 and vmnic2. ?  I have 2x ESXI

run VLANS 10,20,30,40,50 down all trunks. ?

example :
ESXI01
vmnic0    TRK1
vmnic1    TRK2
vmnic2    TRK3

ESXI02
vmnic0    TRK4
vmnic1    TRK5
vmnic2    TRK6
so u mean?

and..... so?
ESXI01
vmnic0    TRK1,  allow acces member VLAN 10,20,30,40,50
vmnic1    TRK2,  allow acces member VLAN 10,20,30,40,50
vmnic2    TRK3,  allow acces member VLAN 10,20,30,40,50

ESXI02
vmnic0    TRK4,  allow acces member VLAN 10,20,30,40,50
vmnic1    TRK5,  allow acces member VLAN 10,20,30,40,50
vmnic2    TRK6,  allow acces member VLAN 10,20,30,40,50

No, create a trunk using three network ports on the physical switch.

assign VLANS, 10,20,30,40 and 50 to these trunks 1, 2 and 3.

then connect network cables to the ESXi hosts, and use the correct Tags - 10,20,30,40 and 50 for your virtual machine portgroups and storage network

should esxi02 vmnic0,1,2 also member trunk1,2,3 ? i do not Need created  trunk 4,5,6 isnt it?

this mean is i Need every trunk 6 ports ?

sorry for my many questions

do i Need to separate ISCSI NAS Connection with New trunk :
 Static Trunk 3 - ISCSI NAS-   port 18,20  VLANS, 10,20,30,40 and 50  something like ?

Your iSCSI NAS does not need any VLANS, other than it's storage VLAN30.

whether you trunk, or team depends on vendor information, teaming  (trunk) sometimes is not supported.

what were you doing if you create such as Network? i just try to get some real live experiance from u

of cource my NAS is not expensive SAN storage but some iscsi funktions , i would try

what were you doing if you create such as Network? i just try to get some real live experiance from u

I don't understand, you could you explain and expand.

it ist ok. thank you so much for your help.

thank you

no problems