Configure Vmworkstation

Configure Vmware Workstation

**On my Laptop, I have Wireless LAN Adapter Wifi
IPv4 :10.0.0.102
DG:10.0.0.1

***On Vmware Workstation , the config is as shown below:
vmvm
***on the VM the config is as shown below:
vm
however when from the VM, I still cannot connect to internet.

Any Help ?


Thank you
jskfanAsked:
Who is Participating?
 
Andrew Hancock (VMware vExpert / EE MVE^2)Connect With a Mentor VMware and Virtualization ConsultantCommented:
Click Restore Defaults.

and then select which network interface you want to Bridge to, if that's your WiFi in the laptop select that.

Use Bridged. (if you want your VM, to use the same IP Address Range/Subnet as your Host Laptop).

If you want to use NAT, then select NAT, but there is no need to change the IP Addresses, that VMware Workstation has pre-configured for your NATTed network.
0
 
jskfanAuthor Commented:
I picked this option and it worked.

Click Restore Defaults.

and then select which network interface you want to Bridge to, if that's your WiFi in the laptop select that.

Use Bridged.
0
 
jskfanAuthor Commented:
Excellent !!
Thank you  Andrew
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
np
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.