<div>
so in this case<br />
<br />
switch 1 port 1 to switch 2 port 2 <br />
switch 1 port 2 to switch 2 port 1
</div>


so in this case

switch 1 port 1 to switch 2 port 2
switch 1 port 2 to switch 2 port 1

<div>
<div class="content wysiwyg-content">
Is there a special way to cable or config two 3650's as a stack with a stacking kit?
</div>
</div>


Is there a special way to cable or config two 3650's as a stack with a stacking kit?

Cisco 3650 Stacking question

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).