Imran Shabir
asked on
Cisco Aironet DHCP Config
Hi,
I have a Cisco Aironet 1602i-e-k9, I have configured it (attached config) and I wanted to assign the DHCP pool Wifi (created in the config) to assign it to the users. It works if I put the IP address in manually but I wanted to have the AP do the DHCP leases.
Cisco_Aironet_AP_trial.txt
Thanks in advance
I have a Cisco Aironet 1602i-e-k9, I have configured it (attached config) and I wanted to assign the DHCP pool Wifi (created in the config) to assign it to the users. It works if I put the IP address in manually but I wanted to have the AP do the DHCP leases.
Cisco_Aironet_AP_trial.txt
Thanks in advance
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi Craig,
as they say "patience is a virtue", same goes for me. Your suggestion worked, the only issue was that it took longer to connect, assumption is that i am not connected to a router thats properly why.
Thanks.
as they say "patience is a virtue", same goes for me. Your suggestion worked, the only issue was that it took longer to connect, assumption is that i am not connected to a router thats properly why.
Thanks.
ASKER
As per suggested config, this worked perfectly.
ASKER
Hi Craig, i did as you suggested but it still doesnt give out dhcp (attached new config).
config.txt