Link to home
Start Free TrialLog in
Avatar of Jean-Jacques CELMA
Jean-Jacques CELMAFlag for France

asked on

PBX clock is not synchronizing with DC

I have on VLAN 3 (10.10.110/24) a PBX and VLAN 4 (10.0.112.0/24) IP phones.  routing between VLAN 1 and VLAN 2 is working.
On VLAN 1 (192.168.110.0/24) I have computers, W2008 DC, W2008 database.
I can ping from VLAN 1 the PBX on VLAN 3
I have setup the DC IP address as NTP server on the PBX. but I m seeing the status disconnected. That's probably mean from VLAN 3 I can"t reach the DC located on the VLAN 1

I am trying to find out how I can fix this to be able to synchronize the PBX and IP phones clock with the DC.

Any idea?
ASKER CERTIFIED SOLUTION
Avatar of masnrock
masnrock
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
you need UDP 123 from NTP client (PBX) to NTP server, make sure VLAN3 can reach to DC IP over all well known AD port group which should include UDP 123 as well