Inter VLAN routing

I am not an expert in Cisco. I am just configuring VLAN in my network.
I have create 2 more VLANs other than native VLAN. VLAN 9 with IP 192.168.9.1 and VLAN 10 with IP 192.168.10.1
now VLAN9 can reach  VLAN10 but VLAN10 cannot reach VLAN9. Is there anyone who can guide me how to have inter VLAN communication as per best practice? Attached configuration. Once I am done I need to configure traffic to firewall for internet access.
GTSwitch.txt
LVL 29
MAS (MVE)Technical Department HeadAsked:
Who is Participating?
 
Don JohnstonInstructorCommented:
If a host on one VLAN can ping a host on another VLAN, then you have bi-directional traffic flow.

The problem is with the firewall on one of the hosts.  Most Likely the one which can successfully initiate the ping.

Check the firewall settings on that host so that it can receive ICMP echo requests.
1
 
MAS (MVE)Technical Department HeadAuthor Commented:
You are the man
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.