Internet traffic to the newly created VLANs

I am not an expert in Cisco. I am just configuring VLAN in my network.
I have create 2 more VLANs other than native VLAN. VLAN 9 with IP 192.168.9.1, VLAN 10 with IP 192.168.10.1 and VLAN1(default) with 192.168.0.254.
Now VLAN9 can reach  VLAN10 and  VLAN10 can reach VLAN9. But VLAN9 and 10 cannot reach VLAN1 IPS. Now I would like to have communication between all these VLANs.
I would like to route all traffics to Fortinet firewall except internal IP traffic. Attached configuration.
Is there anyone who can guide me how to have inter VLAN communication as per best practice?
GTSwitch.txt
LVL 30
MAS (MVE)EE Solution GuideAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Don JohnstonInstructorCommented:
Do a "show ip route".  I'm guessing you don't have a default route to the firewall.

Create it with "ip route 0.0.0.0 0.0.0.0 192.168.0.1"  (I'm guessing at the next hop address.

Don't forget to make sure the firewall has routes to the 192.168.9.0 and 192.168.10.0 networks using the 192.168.0.254 address as the next hop address.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
MAS (MVE)EE Solution GuideAuthor Commented:
I added ip route 0.0.0.0 0.0.0.0 192.168.0.1 on the switch.
And added static routes on Fortinet (for 192.168.9.0 and 192.168.10.0)  with gateway 192.168.0.254
GT#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.0.1 to network 0.0.0.0

C    192.168.9.0/24 is directly connected, Vlan9
C    192.168.10.0/24 is directly connected, Vlan10
C    192.168.0.0/24 is directly connected, Vlan1
S*   0.0.0.0/0 [1/0] via 192.168.0.1

Open in new window

Now it has internet acess. Please check the above and let me know if its wrong.
Thanks a lot.
0
Don JohnstonInstructorCommented:
If it works... It must be right.  ;-)

It looks fine.
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Networking Protocols

From novice to tech pro — start learning today.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.